Objects

Enter a word or phrase to perform a general search across all records in the Objects catalog. You can also browse records in the catalog without performing a search.

Search Tips

Searches are not case sensitive.
Searching for multiple words connects them with OR by default. Matching records can contain any of the words.
Connect multiple words with AND if you only want to see records containing both words.
Use quotation marks to search for a phrase.
Place an asterisk (*) at the end of a word as a wildcard.

41905 results found. Records searched: 41905

2018.0009.0003 - Bobbin, Sewing
Metal, circular thread bobbin for Singer Sewing Machine Model 201. Bobbin is stored in top drawer of sewing machine main body on a bobbin rack. There is a large hole in the center, one smaller hole next to the big hole, two circular metal pieces, and the thinner neck where the thread goes. This bobbin has cream thread.

Record Type: Object
2018.0009.0004 - Bobbin, Sewing
Metal, circular thread bobbin for Singer Sewing Machine Model 201. Bobbin is stored in top drawer of sewing machine main body on a bobbin rack. There is a large hole in the center, four smaller holes in a square pattern on both circular metal pieces, and the thinner neck where the thread goes. This bobbin is empty.

Record Type: Object
2018.0009.0005 - Bobbin, Sewing
Metal, circular thread bobbin for Singer Sewing Machine Model 201. Bobbin is stored in top drawer of sewing machine main body on a bobbin rack. There is a large hole in the center, one smaller hole next to the big hole, two circular metal pieces, and the thinner neck where the thread goes. This bobbin has purple and gold thread.

Record Type: Object
2018.0009.0006 - Bobbin, Sewing
Metal, circular thread bobbin for Singer Sewing Machine Model 201. Bobbin is stored in top drawer of sewing machine main body on a bobbin rack. There is a large hole in the center, four smaller holes in a square pattern on both circular metal pieces, and the thinner neck where the thread goes. This bobbin has yellow and light purple thread.

Record Type: Object
2018.0009.0007 - Bobbin, Sewing
Metal, circular thread bobbin for Singer Sewing Machine Model 201. Bobbin is stored in top drawer of sewing machine main body on a bobbin rack. There is a large hole in the center, four smaller holes in a square pattern on both circular metal pieces, and the thinner neck where the thread goes. This bobbin has red and brown thread.

Record Type: Object
2018.0009.0008 - Bobbin, Sewing
Metal, circular thread bobbin for Singer Sewing Machine Model 201. Bobbin is stored in top drawer of sewing machine main body on a bobbin rack. There is a large hole in the center, four smaller holes in a square pattern on both circular metal pieces, and the thinner neck where the thread goes. This bobbin has orange and green thread.

Record Type: Object
2018.0009.0009 - Bobbin, Sewing
Large, plastic bobbin holding brown thread. There is a hole in the center for storage, as well as three triangular shapes with rounded tops that meet at the center hole (looks like a biohazard/radioactive symbol when viewed from the top).

Record Type: Object
2018.0009.0010 - Machine, Sewing
Gathering Foot Lower Shank Attachment. L-shaped attachment foot for Singer Model 201 Sewing Machine. The top of the attachment is vertical and C-shaped (when looking down from the top) post which is the attachment point. The bottom of the attachment is roughly 90 degrees in relation to the post. The foot is flat with a small horizontal bump near the neck of the post. The foot terminates in a slight upraised lip that has a small notch about two-th...

Record Type: Object
2018.0009.0011 - Machine, Sewing
Slotted Binder Part, Lower Shank Attachment (2 slots). L-shaped attachment foot for Singer Model 201 Sewing Machine. The head of the attachment is vertical and C-shaped (when looking down from the top). The foot of the attachment is perpendicular to the head with a flat spot that has two slots. Underneath the metal piece with the two slots is a rectangular piece with a hole in the center. A second attachment is held to the foot with a screw that ...

Record Type: Object
2018.0009.0012 - Machine, Sewing
Slotted Binder Part, Lower Shank Attachment (1 slot). L-shaped attachment foot for Singer Model 201 Sewing Machine. The head of the attachment is vertical and C-shaped (when looking down from the top). The foot of the attachment is perpendicular to the head with a flat spot that has one slot. Underneath the metal piece with the two slots is a rectangular piece with a hole in the center. A second attachment is held to the foot with a screw that ha...

Record Type: Object
2018.0009.0013 - Machine, Sewing
Adjustable Hemmer, Lower Shank Attachment (closed), a rectangular shaped attachment foot for Singer Model 201 Sewing Machine. The head of the attachment is vertical and C-shaped (when looking down from the top). The PR side of the foot is longer than the PL side (making it look like a lopsided rectangle). The shorter PL side has a closing mechanism so that the foot can be adjusted and tightened. An engraved ruler runs from this closing mechanism ...

Record Type: Object
2018.0009.0014 - Machine, Sewing
Adjustable Hemmer, Lower Shank Attachment (open), a rectangular shaped attachment foot for Singer Model 201 Sewing Machine. The head of the attachment is vertical and C-shaped (when looking down from the top). The PR side of the foot is longer than the PL side (making it look like a lopsided rectangle). The shorter PL side has a closing mechanism so that the foot can be adjusted and tightened. An engraved ruler runs from this closing mechanism ba...

Record Type: Object
2018.0009.0015 - Machine, Sewing
Hemmer Foot, Lower Shank attachment for Singer Model 201 sewing machine. The head of the attachment is vertical and C-shaped (when looking down from the top). The foot of the attachment is oriented roughly 90 degrees from the head. The area near where it attaches to the head is flat with an oval shaped cut out on the PR side. The foot terminates into a split end that has a corkscrew metal piece in the middle which turns the fabric as it is pulled...

Record Type: Object
2018.0009.0016 - Machine, Sewing
Edge Stitcher, Lower Shank attachment for Singer Model 201 Sewing Machine. The head of the attachment is vertical and C-shaped (when looking down from the top). The foot of the attachment is zig-zagged shaped with linear cuts made on the left, right, and middle of the rectangular base. In the middle of the foot "SINGER USA" is engraved into the metal.

Record Type: Object
2018.0009.0017 - Machine, Sewing
Ruffler, Lower Shank Attachment for Singer Model 201 Sewing Machine. This attachment is used to create ruffles of various sizes. The attachment head is on the front and is J-shaped. The body of the attachment has a large top with a round screw mechanism that can be loosened to adjust the measurement on the top of the head which is indicated by a metal pin that fits into the slot of 1, 6, or 12. This particular attachment is set to 6. The bottom o...

Record Type: Object
2018.0009.0018 - Machine, Sewing
Ruffler, Lower Shank Attachment for Singer Model 201 Sewing Machine. This attachment is used to create ruffles of various sizes. The attachment head is on the front and is J-shaped. The body of the attachment has a large top with a round screw mechanism that can be loosened to adjust the measurement on the top of the head which is indicated by a metal pin that fits into the slot of 1, 6, or 12. This particular attachment is set to 12. The bottom ...

Record Type: Object
2018.0009.0019 - Tucker
Tucker, Lower Shank Attachment for Singer Model 201 Sewing Machine. The C-shaped metal attachment that secures the foot to the machine is on the back of the foot. Connected to the attachment head is a vertical metal, triangular piece that is open to allow adjustment of the three horizontal metal measurement pieces. The top horizontal piece is flat with a round screw that has a small oval shape track that it can be slid on to adjust. The second ho...

Record Type: Object
2018.0009.0020 - Thimble
Metal sewing thimble produced by Singer Sewing Company as an accessory for their sewing machines. The top of the thimble is textured with round, incised bumps in a radial pattern which extend around the top third on the sides. Underneath this area the metal is smooth and ends with a rounded lip. Small embossed "9" on front and center of the thimble.

Record Type: Object
2018.0009.0021 - Ruler
Small, metal ruler produced by Singer Sewing Company as an accessory for their sewing machines. The measurements range from 0 to 6 although neither number is engraved, however, 1 through 5 and all of the increments of 64ths are present. There is a black, metal L-shaped armature piece attached parallel to the ruler which opens and can be slid up and down the length of the ruler.

Record Type: Object
2018.0009.0022 - Machine, Sewing
A Singer sewing machine part. Might be a plate component of some sort. The part has two black metal pieces and a silver-colored metal piece. The first black metal piece is kite-shaped,with a circular hole in its center. Above that is the second black metal piece, which is shaped like a key-head, and has an ovular hole in the middle. The key-head shaped piece can rotate, allowing its center hole to align with the kite-shaped piece's hole. On top o...

Record Type: Object